Overview of Round shape Titanium sputtering target vacuum coating material 2N5 purity customized size
Titanium (No) he mea kemika me ka helu atomika 22 a ua hōʻailona ʻia ʻo Ti ma ka papa ʻaina. No ka hui metala hoʻololi a ʻike ʻia no kona haʻahaʻa haʻahaʻa, kiʻekiʻe ikaika-i-kaumaha ratio, a me ke kū'ē i ka corrosion. ʻIke ʻia ma 1791 na William Gregor, Ua lilo ka titanium i mea koʻikoʻi ma waena o nā ʻoihana he nui ma muli o kāna hui kūʻokoʻa o nā waiwai.
Feature of Round shape Titanium sputtering target vacuum coating material 2N5 purity customized size
-
Haʻahaʻa haʻahaʻa a me ka ikaika kiʻekiʻe: ʻO ka Titanium e pili ana 45% ʻoi aku ka māmā ma mua o ke kila akā loaʻa ka ikaika like, hana ia i mea kūpono no nā noi i mea koʻikoʻi ka hoʻēmi kaumaha me ka ʻole o ka hoʻohaumia ʻana i ka ikaika.
-
Pale ʻino: Hoʻokumu ia i kahi papa ʻokikene passive e pale i ka metala lalo mai nā mea ʻino, me ka wai kai a me ka chlorine, ʻo ia ke kūpaʻa loa i ka ʻino.
-
Biocompatibility: Ua ʻae maikaʻi ʻia ka Titanium e ke kino o ke kanaka a ʻaʻole hoʻi i nā hopena ʻino, ʻo ia ke kumu i hoʻohana nui ʻia i nā implants lapaʻau a me nā mea hana ʻoki.
-
Kū'ē wela: Me kahi helu hehee o 1,668°C (3,034°F), hiki i ka titanium ke pale i nā wela kiʻekiʻe, kūpono ia no ka aerospace a me nā noi kaʻa.
-
Non-Magnetic a me Non-Toxic: Hana kēia mau waiwai i ka titanium no nā noi i nā mīkini MRI a me nā mea uila ʻē aʻe.
-
Paleʻa luhi: Hōʻike ka Titanium i ke kūpaʻa maikaʻi loa i ka luhi metala, mea koʻikoʻi i nā noi hoʻouka cyclic e like me nā ʻāpana mokulele.
.
(Round shape Titanium sputtering target vacuum coating material 2N5 purity customized size)
Parameters of Round shape Titanium sputtering target vacuum coating material 2N5 purity customized size
The precision of the titanium sputtering target vacuum coating material depends on several factors, including the specific titanium oxide particles used, the vacuum pressure and flow rate, the sputtering power, and the thickness of the coated film. In general, the larger the titanium oxide particles and the higher the vacuum pressure, the better the quality of the coating.
The “parameter” you mentioned could refer to the parameters that control these factors. ʻo kahi laʻana:
* Titanium oxide particle size: This parameter determines the number and shape of the titanium oxide particles in the coating film. Smaller particles will have a smoother surface finish and less wear resistance, while larger particles will have a rougher surface finish with more wear resistance.
* Vacuum pressure: The higher the vacuum pressure, the stronger the interaction between the titanium dioxide particles and the substrate, which can lead to better adhesion and retention of the coating. Eia naʻe, increasing the pressure also increases the risk of damage to the substrate or erosion of the coating.
* Sputtering power: The higher the sputtering power, the faster the growth of the titanium oxide particles and the thicker the coating. Eia naʻe, increasing the power also increases the risk of overcorrection and creating a clog in the sputtering system.
The “customized size” parameter refers to the desired coating thickness and size. It is typically measured in microns or millimeters and can be adjusted based on specific requirements such as product application, aesthetic considerations, and performance goals.
holookoa, selecting the appropriate titanium sputtering target vacuum coating material and optimizing the parameters for optimal performance requires careful consideration of a variety of factors, including material properties, deposition conditions, and process optimization.
(Round shape Titanium sputtering target vacuum coating material 2N5 purity customized size)
ʻIkepili Hui
ʻO Metal Mummy kahi mea hoʻolako mea hoʻohana kemika honua & mea hana me ka ʻoi aku o 12 mau makahiki-ʻike i ka hāʻawi ʻana i nā huahana keleawe kiʻekiʻe kiʻekiʻe a me nā mea pili.
He keʻena ʻenehana loea ko ka hui a me ka Quality Supervision Department, he hale hana i hoolako pono ia, a hoʻolako ʻia me nā lako hoʻāʻo kiʻekiʻe a me ke kikowaena lawelawe mea kūʻai aku ma hope o ke kūʻai aku.
Inā ʻoe e ʻimi nei i ka pauka metala kiʻekiʻe a me nā huahana pili, eʻoluʻolu e leka uila iā mākou a iʻole e kaomi i nā huahana i makemakeʻia e hoʻouna i kahi nīnau.
Uku Uku
L/C, T/T, Hui Komohana, Paypal, Kāleka ʻaiʻē etc.
Hoʻouna
Hiki ke hoʻouna ʻia ma ke kai, ma ka lewa, a i ʻole ma ka hōʻike ʻana iā ASAP i ka wā e loaʻa ai ka uku.
FAQ
(Round shape Titanium sputtering target vacuum coating material 2N5 purity customized size)
