Overview of super Baoji CXMET vacuum coating titanium sputtering target
Titanium (Ti) is a chemical element with the atomic number 22 and is symbolized as Ti on the periodic table. It belongs to the transition metals group and is known for its low density, high strength-to-weight ratio, and exceptional corrosion resistance. Discovered in 1791 by William Gregor, titanium has become a vital material across numerous industries due to its unique combination of properties.
Feature of super Baoji CXMET vacuum coating titanium sputtering target
-
Low Density and High Strength: Titanium is about 45% lighter than steel but possesses similar strength, making it ideal for applications where weight reduction is critical without compromising strength.
-
Corrosion Resistance: It forms a passive oxide layer that protects the underlying metal from corrosive substances, including sea water and chlorine, making it highly resistant to corrosion.
-
Biocompatibility: Titanium is well-tolerated by the human body and doesn’t cause adverse reactions, which is why it’s widely used in medical implants and surgical instruments.
-
ຄວາມຕ້ານທານຄວາມຮ້ອນ: With a melting point of 1,668°C (3,034°F), titanium can withstand high temperatures, making it suitable for aerospace and automotive applications.
-
Non-Magnetic and Non-Toxic: These properties make titanium ideal for applications in MRI machines and other sensitive electronic devices.
-
Fatigue Resistance: Titanium demonstrates excellent resistance to metal fatigue, crucial in cyclic loading applications such as aircraft parts.
.
(super Baoji CXMET vacuum coating titanium sputtering target)
Parameters of super Baoji CXMET vacuum coating titanium sputtering target
The Baoji CX Met Vacuum coating titanium sputtering target parameter is typically set to the following values:
– Maximum temperature: High temperature, usually up to 150°C or 263°F (94°C or 184°C)
– Pressure: Low pressure, usually around 2 atmospheres (1 bar)
– Azinity: Low azinity, usually around 1% – 2%
-: Fine particles with a diameter of less than 0.5 ມມ
– Alumina coatings can be either amorphous or rigid, but for precision coating purposes, they should be amorphous.
– Amount of sputtering material: The amount of sputtering material needed for a specific coating may vary depending on the desired finish and performance requirements.
It’s important to note that these parameters are just general guidelines, and the actual setting will depend on the specific coating being used and the task at hand.
(super Baoji CXMET vacuum coating titanium sputtering target)
ຂໍ້ມູນບໍລິສັດ
Metal Mummy ເປັນຜູ້ສະໜອງວັດສະດຸເຄມີທົ່ວໂລກທີ່ເຊື່ອຖືໄດ້ & ຜູ້ຜະລິດທີ່ມີຫຼາຍກວ່າ 12 ປີປະສົບການໃນການສະຫນອງຜະລິດຕະພັນທອງແດງຄຸນນະພາບສູງ super ແລະພີ່ນ້ອງ.
ບໍລິສັດມີພະແນກວິຊາການມືອາຊີບແລະພະແນກກວດກາຄຸນນະພາບ, ຫ້ອງທົດລອງທີ່ມີອຸປະກອນດີ, ແລະມີອຸປະກອນການທົດສອບຂັ້ນສູງແລະສູນບໍລິການລູກຄ້າຫລັງການຂາຍ.
ຖ້າທ່ານກໍາລັງຊອກຫາຝຸ່ນໂລຫະທີ່ມີຄຸນນະພາບສູງແລະຜະລິດຕະພັນພີ່ນ້ອງ, ກະລຸນາຮູ້ສຶກວ່າບໍ່ເສຍຄ່າເພື່ອຕິດຕໍ່ພວກເຮົາຫຼືຄລິກໃສ່ຜະລິດຕະພັນທີ່ຕ້ອງການເພື່ອສົ່ງສອບຖາມ.
ວິທີການຊໍາລະເງິນ
L/C, T/T, Western Union, Paypal, ບັດເຄຣດິດ ແລະ ອື່ນໆ.
ການຂົນສົ່ງ
ມັນສາມາດຖືກສົ່ງໂດຍທາງທະເລ, ໂດຍທາງອາກາດ, ຫຼືໂດຍການເປີດເຜີຍ ASAP ທັນທີທີ່ໃບຮັບເງິນຊໍາລະຄືນ.
FAQ
(super Baoji CXMET vacuum coating titanium sputtering target)
