Overview of Ti powder 300-500mesh 3D printing spherical titanium powder
Titanium (O) he huānga matū me te tau ngota 22 a ka tohuhia hei Ti i runga i te ripanga waahi. No te roopu konganuku whakawhiti, e mohiotia ana mo tona kiato iti, teitei kaha-ki-taimaha ōwehenga, me te tino parenga waikura. I kitea i roto i 1791 na William Gregor, Ko te titanium kua noho hei taonga nui puta noa i nga umanga maha na tona whakakotahitanga ahurei o nga rawa.
Feature of Ti powder 300-500mesh 3D printing spherical titanium powder
-
Iti Kiato me te Kaha Teitei: Titanium e pā ana ki 45% he mama ake i te rino engari he rite te kaha, kia pai mo nga tono he mea nui te whakaheke taumaha me te kore e whakararu i te kaha.
-
Te Waihanga Atete: Ka hanga he papa waikura hāngū hei tiaki i te whakarewa o raro mai i nga matū pirau, tae atu ki te wai moana me te maota, kia tino ātete ki te waikura.
-
Te paioraora: Ko te Titanium he pai te whakamanahia e te tinana o te tangata, a, kaore e puta he mate kino, Ko te aha i whakamahia nuitia ai i roto i nga taputapu rongoa me nga taputapu rongoa.
-
Parenga Wera: Me te ira whakarewa 1,668°C (3,034°F), Ka taea e te titanium te tu ki te wera nui, kia pai ai mo te aerospace me nga tono miihini.
-
Kore-aukume me te kore-Toxic: Ko enei taonga ka pai te titanium mo nga tono i roto i nga miihini MRI me etahi atu taputapu hiko tairongo.
-
Ātete Rohirohi: Ko te Titanium e whakaatu ana i te tino kaha ki te ngenge whakarewa, he mea nui ki nga tono uta porohita penei i nga waahanga rererangi.
.
(Ti powder 300-500mesh 3D printing spherical titanium powder)
Parameters of Ti powder 300-500mesh 3D printing spherical titanium powder
The 3D printing process requires different parameters depending on the type of powder and the desired end product. Here are some general parameters for using Ti powder with 3D printing:
* Ti powder: It is essential to choose the right grade of Ti powder that matches the specific application requirements. Generally, high-quality Ti powders have lower melting points, which means they will take longer to dry during printing.
* Print temperature: The print temperature is critical to achieving good print quality. It should be set between 80°C (176°F) and 120°C (242°F) to ensure accurate bonding of the layers.
* Printing speed: The printing speed can affect the overall print quality. Hei tauira, slower speeds will result in better layer separation and smoother surfaces. Heoi ano, too slow speeds can cause layer warping or flying, leading to uneven surface finish and Poor layer adhesion.
* Post-processing: The post-processing stage involves removing excess material from the printed object, such as dust, debris, and resin. The quality of the post-processing step can greatly impact the final outcome. It’s recommended to use industrial-grade filters to remove impurities and particles.
* Material consistency: Different materials require different properties for successful printing. To achieve consistent results, it’s essential to select materials with the same chemical composition as the intended final product.
Keep in mind that these parameters may vary depending on the specific equipment and settings used for the 3D printing process. Always refer to the manufacturer’s instructions and guidelines for the best results.
(Ti powder 300-500mesh 3D printing spherical titanium powder)
Kōtaha Kamupene
Ko Metal Mummy he kaiwhakarato rawa matū o te ao & he kaiwhakanao neke atu i te 12-tau te wheako ki te whakarato i nga hua parahi me nga hua whanaunga.
He tari hangarau ngaio me te Tari Tirotiro Kounga te kamupene, he taiwhanga pai rawa atu, me nga taputapu whakamatautau matatau me te pokapū ratonga kaihoko muri-hoko.
Mena kei te rapu koe mo te paura whakarewa kounga teitei me nga hua whanaunga, Tena koa whakapiri mai ki a maatau, paatohia ranei nga hua e hiahiatia ana hei tuku patai.
Nga Tikanga Utu
L/C, T/T, Western Union, Paypal, Kaari nama etc.
Tukunga
Ka taea te tuku ma te moana, mā te hau, ma te whakaatu ranei i te ASAP i te wa kua tae mai nga utu.
FAQ
(Ti powder 300-500mesh 3D printing spherical titanium powder)
